3d models development

[DocAN.]

looks fine, keep going with other items

[Balthasar]

Ok, started over again with some more simple object:

Download Link

The 4.7 mm ammunition



Thanks to Harald for some tips/support on this and yeah good job guys!

[White tiger]

http://www.mediafire.com/?rbhvclq2c9s69r2

[zamp]

I did this last friday and also pasted the link on #2238

Iguana Stick
Vertex Count: 87

Download

[LagMaster]

awesome jobs!

[Gray]

EDIT: I'm out of ideas for the Hintbook other side :/ Any ideas?

Maybe you should try to use something from this 3224x2149 disc cover:
http://www.fallout-archives.com/pics/cover_fallout_2.jpg

Iguana Stick
Vertex Count: 112

Awesome, but a bit too detailed. Try to lower the polycount at least to 70-80. Use 3-sided stick and 6-sided tomatoes/onions. There will not be any visible difference.

[zamp]

Awesome, but a bit too detailed. Try to lower the polycount at least to 70-80. Use 3-sided stick and 6-sided tomatoes/onions. There will not be any visible difference.

Yeah I'll try ripping out some vertexes later. Now tho I just finished the first draft of the fruit.
The texture doesn't match properly here and there and it's a tad too high poly (102 vertexes)
I'll fix that later too.

Vertex count: 85


Download

[White tiger]

It would be nice if you put objects on the ground, they were randomly rotate.

junk


http://www.mediafire.com/?ph57uzhef8nr71n

[Graf]

Iguana Stick

Please don't save it to the .blender and .x. Both file formats are inapproprite. Use .obj or .3ds instead.

[Balthasar]

Lockpick Set (normal one):



Download Link

[Gray]

Lockpick Set (normal one):

What about the other side?

[Balthasar]

What about the other side?

Here is the back (or outside):



I didn't copy the same tex to the outside because this wouldn't really make sense since you have an inside (with the lockpicks in it) and a blank outside. If you would fold it together you would only see the leather outside.

[zamp]

Please don't save it to the .blender and .x. Both file formats are inapproprite. Use .obj or .3ds instead.

Ah.. Last time I read the 3d development wiki page it said save to .x, I'll add .3ds to the packages
Edit1: Also I fixed the iguana stick, now it has 87 vertexes. Can't really go any lower unless you make the onions/tomatoes into squares or remove a part of the model
Edit2: Also fixed the fruit, the texture doesn't match perfectly yet. Removed quite a few polygons from it and brought vertex count down to 85

[Gray]

I didn't copy the same tex to the outside because this wouldn't really make sense since you have an inside (with the lockpicks in it) and a blank outside. If you would fold it together you would only see the leather outside.

I fixed the iguana stick, now it has 87 vertexes. Can't really go any lower unless you make the onions/tomatoes into squares or remove a part of the model

87 is good, but I can't open your kebab.3ds because of "Improper file format" error. Fruit opens normally. Is it my personal trouble or the file is damaged?

P.S. low-poly modelling has a lot of tricks to lower the polycount. I can show the main one.

If it small enough, you will never note that there are just 4 vertexes in this stick
Optimization is a creative process. Think, what will be visible and what won't be and cut the excesses.

[Balthasar]

Extendend Lockpick Set:



Download Link 

Hmm, the texture is a bit ugly due to the big amount of scaling/stretching of the original picture, which is really small. If someone could do better or even does a totally new tex for it maybe this would fit better.