fodev.net
Other => FOnline:2238 Forum => Archives => Survival Guides / Game Help => Topic started by: Siiepher on February 19, 2012, 12:43:39 am
-
Whenever I try to run the launcher I get the error
"Cannot connect to update server"
Any help would be apreciated
-
Same here.
-
I'm having the same problem as well. :-\
-
I am also having this problem, find anything out yet good sir?
-
Open your eyes
http://www.rookie.name/fonline/playerStats.php
-
Open your own damn eyes, I posted that while the server was up.
-
You can download all updated files from here:
http://fodev.net/forum/index.php?topic=21584.msg178512#msg178512
-
I dont quite understand the datafiles.cfg, what do I do there?
Because I think I put all the files in the right place, but now it just closes immediately
-
I dont quite understand the datafiles.cfg, what do I do there?
Because I think I put all the files in the right place, but now it just closes immediately
in main folder: DataFiles.cfg, Assimp32.dll, FO2238Config.exe, FOConfig.exe, FOnline.exe, FOnlineGL.exe
in "data" subfolder: faction001.zip, faction.zip, factioncritters.zip
in "data/cache" subfolder: default.cache
Try both FOnline.exe and FOnlineGL.exe.
If it doesn't work it's either something in newest client or you don't have FOnline.cfg/DataFiles2238.cfg
You can create them by running config apps.
Run FOConfig.exe and in "Net" tab setup server IP / port as 94.23.237.127 / 2238
Run FO2238Config.exe and in "Data Files" tab give paths to Fallout 2 Master.dat and Critter.dat.
-
I did everything you told me and this is what it gave me
Starting FOnline (version 0415-E7)...
Engine initialization...
Sprite manager initialization...
Animation3d::StartUp - Fail to create effect, skinning switched to software.
Load sprite 'egg.png' fail. Egg disabled.
Sprite manager initialization complete.
SpriteManager::LoadFontFO - File<OldDefault.fofnt> not found.
FOnline engine initialization fail.
FOnline finished.
-
Check, if you have proper paths given in DataFiles.cfg for these files:
include Datafiles2238.cfg
data\factioncritters.zip
data\faction.zip
data\faction001.zip
In case you haven't figured it out yet.
-
Check, if you have proper paths given in DataFiles.cfg for these files:
include Datafiles2238.cfg
data\factioncritters.zip
data\faction.zip
data\faction001.zip
In case you haven't figured it out yet.
Can you post your config file so I know how mine should look?
-
Never mind the update server seems to be fine now, thanks for everyone's help though.